This post contains affiliate links — I may earn a commission at no cost to you.
Guide
How to Setup DualSense Edge on PC (No PS5 Required)
The definitive guide to remapping and tuning your DualSense Edge on PC. Skip the console and save profiles directly to your hardware memory via our WebHID utility.
Configure My Controller →Free · No install · Works in Chrome
How it works
01
Connect via USB
Plug your DualSense Edge into your PC with a USB-C cable. Bluetooth is not supported — USB only.
02
Open Edge Config in Chrome
Open edge-config.com in Chrome or Edge on Windows. Click Connect and select your controller from the browser prompt.
03
Read your profiles
The app reads all 4 profile slots directly from your controller's onboard memory. No PS5 needed.
04
Remap, tune, sync
Remap buttons, adjust stick curves, set trigger deadzones — then hit Sync. Changes are written to hardware instantly.
Topics
no ps5dualsense edge pc softwarewindows 11 configuratorremap without console
Fix it in 60 seconds
Connect your controller, open the app, done. Free — no install required.
As an Amazon Associate, I earn from qualifying purchases.